List of Articles

Journal of the Korean Wood Science and Technology. Vol. 46, No. 1, 2018

Original Article
Analysis of Lacquer and CNSL Using Infrared Spectrometer and Pyrolysis-GC/MS
적외선분광분석과 Py-GC/MS를 이용한 옻칠 및 캐슈칠도막 분석
J. Korean Wood Sci. Technol. 2018;46(1):1-9.
https://doi.org/10.5658/WOOD.2018.46.1.1
HTML PDF PubReader
Development of a Kiln Dry Schedule for Lindera erythrocarpa Grown in Hongsung, Chungnam Province, Korea
충남 홍성지역에서 자란 비목나무(Lindera erythrocarpa)의 열기건조스케쥴 개발
J. Korean Wood Sci. Technol. 2018;46(1):10-16.
https://doi.org/10.5658/WOOD.2018.46.1.10
HTML PDF PubReader
Preparation of Nanoporous Activated Carbon with Sulfuric Acid Lignin and Its Application as a Biosorbent
황산 가수분해 잔사 리그닌을 이용한 나노 세공 활성탄 제조 및 친환경 흡착제로의 활용 가능성 평가
J. Korean Wood Sci. Technol. 2018;46(1):17-28.
https://doi.org/10.5658/WOOD.2018.46.1.17
HTML PDF PubReader
Anatomical Characteristics of Three Korean Bamboo Species
국내산 대나무 3종의 해부학적 특성
J. Korean Wood Sci. Technol. 2018;46(1):29-37.
https://doi.org/10.5658/WOOD.2018.46.1.29
HTML PDF PubReader
Antioxidant Activities of Hot Water Extracts from Different Parts of Rugosa rose (Rosa rugosa Thunb.)
해당화(Rosa rugosa Thunb.) 부위별 열수추출물의 항산화 활성 분석
J. Korean Wood Sci. Technol. 2018;46(1):38-47.
https://doi.org/10.5658/WOOD.2018.46.1.38
HTML PDF PubReader
Larch Pellets Fabricated with Coffee Waste and the Commercializing Potential of the Pellets
커피박과 낙엽송 목분을 이용한 펠릿 제조 및 이에 대한 상용화 검토
J. Korean Wood Sci. Technol. 2018;46(1):48-59.
https://doi.org/10.5658/WOOD.2018.46.1.48
HTML PDF PubReader
Effect of Carbonization Temperature on the Surface Temperature of Carbonized Board
탄화온도가 탄화보드의 표면온도에 미치는 영향
J. Korean Wood Sci. Technol. 2018;46(1):60-66.
https://doi.org/10.5658/WOOD.2018.46.1.60
HTML PDF PubReader
Study on the Physical and Mechanical Properties of Particleboard and Oriented Strandboard Manufactured by Tulliptree (Liriodendron tulipifera L.)
백합나무를 이용하여 제조한 3층 파티클보드와 배향성 스트랜드보드(OSB)의 물성에 관한 연구
J. Korean Wood Sci. Technol. 2018;46(1):67-72.
https://doi.org/10.5658/WOOD.2018.46.1.67
HTML PDF PubReader
Preparation of EVA/Intumescent/Nano-Clay Composite with Flame Retardant Properties and Cross Laminated Timber (CLT) Application Technology
난연특성을 가지는 EVA/Intumescent/나노클레이 복합재료 제조 및 교호집성재(Cross Laminated Timber) 적용 기술
J. Korean Wood Sci. Technol. 2018;46(1):73-84.
https://doi.org/10.5658/WOOD.2018.46.1.73
HTML PDF PubReader
Longitudinal Bonding Strength Performance Evaluation of Larch Lumber
낙엽송 소경각재의 종접합 성능평가
J. Korean Wood Sci. Technol. 2018;46(1):85-92.
https://doi.org/10.5658/WOOD.2018.46.1.85
HTML PDF PubReader
Prediction of The MOR of Larch Lumber
낙엽송 소경각재의 휨 파괴계수 예측
J. Korean Wood Sci. Technol. 2018;46(1):93-99.
https://doi.org/10.5658/WOOD.2018.46.1.93
HTML PDF PubReader
Anatomical Characteristics of Korean Red Pines According to Provinces
한국산 소나무의 지역에 따른 해부학적 특성
J. Korean Wood Sci. Technol. 2018;46(1):100-106.
https://doi.org/10.5658/WOOD.2018.46.1.100
HTML PDF PubReader
A Study on the Development of Bamboo/PLA Bio-composites for 3D Printer Filament
3D 프린터 필라멘트 제작용 대나무/PLA 바이오복합재료 개발 연구
J. Korean Wood Sci. Technol. 2018;46(1):107-113.
https://doi.org/10.5658/WOOD.2018.46.1.107
HTML PDF PubReader