Table 3. Result of average boiling water soak delamination rate on adhesives by manufacturing environment
| Specimen | Average boiling water delamination (%) | CV1) | Highest delamination (%) | Lowest delamination (%) | KS F 20812) |
| LY-A1SN | 14.1 | 0.62 | 35.9 | 0.0 | NO pass |
| LY-A4SN | 5.3 | 0.88 | 16.4 | 0.0 | Pass |
| LY-A4WN | 25.8 | 0.51 | 51.3 | 0.0 | NO pass |
| LY-A6WN | 23.5 | 0.46 | 48.5 | 5.6 | NO pass |
| LY-B4WN | 22.9 | 0.40 | 40.9 | 6.6 | NO pass |
| LY-B6WN | 15.0 | 0.75 | 58.6 | 1.8 | NO pass |
| LY-A4WD | 40.5 | 0.27 | 75.0 | 20.8 | NO pass |
| LY-A4WI | 26.4 | 0.50 | 67.5 | 5.2 | NO pass |
| LY-B4WD | 26.3 | 0.42 | 43.8 | 0.0 | NO pass |
| LY-B4WI | 15.1 | 0.71 | 36.8 | 0.0 | NO pass |
Coefficient of variation.
According to the KS F 2081 standard, 10% or less of boiled water soaking delamination rate passes.