Journal of the Korean Wood Science and Technology
The Korean Society of Wood Science & Technology
This corrects the article "Evaluation of Adhesive Characteristics of Mixed Cross Laminated Timber (CLT) Using Yellow Popular and Softwood Structural Lumbers" ( Vol: 52, Issue: 1, Page: 58)
Erratum

Erratum to: Evaluation of Adhesive Characteristics of Mixed Cross Laminated Timber (CLT) Using Yellow Poplar and Softwood Structural Lumber

Keon-Ho KIM1,https://orcid.org/0000-0001-6423-164X, Hyun-Mi LEE2, Min LEE2
1Wood Industry Division, Forest Products and Industry Department, National Institute of Forest Science, Seoul 02455, Korea
2Wood Engineering Division, Forest Products and Industry Department, National Institute of Forest Science, Seoul 02455, Korea
Corresponding author: Keon-Ho KIM (e-mail: keon@korea.kr)

Copyright 2024 The Korean Society of Wood Science & Technology. This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/4.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Published Online: Jul 25, 2024


ERRATUM

In the published article “Evaluation of Adhesive Characteristics of Mixed Cross Laminated Timber (CLT) Using Yellow Popular and Softwood Structural Lumbers. Journal of the Korean Wood Science and Technology 52(1): 58-69. https://doi.org/10.5658/WOOD.2024.52.1.58,” popular should be modified to poplar in title, abstract and keywords [1]. The editorial office would like to correct it.

  1. Article title

    Popular → Poplar, Lumbers → Lumber.

  2. Abstract

    line 4, line 10: Popular → Poplar.

  3. Keywords

    yellow popular → yellow poplar.

  4. Page 59 right paragraph, line 4 and line 11 :

    popler → poplar.

REFERENCES

1.

Kim, K.H., Lee, H.M., Lee, M. 2024. Evaluation of adhesive characteristics of mixed cross laminated rimber (CLT) using yellow popular and softwood structural lumbers. Journal of the Korean Wood Science and Technology 52: 58-69.